Monthly Archives: August 2016

PAT Testing Compliance Is Essential

Portable Appliance Testing in Watford – or PAT Testing in Watford – is as essential as elsewhere in the UK. Every company in both the private and public sector needs to carry out inspections on equipment used by staff, clients and customers. Regulations were introduced in 1989 concerning work-related electrical equipment. The law applies equally to fixed and to portable equipment, where the portable equipment is connected to the fixed electrical equipment. It’s required that the equipment should be maintained to prevent danger. Every self-employed person, and employer must comply with the provision of the regulations.

Today, more than two decades after the introduction of the legal requirements, PAT Testing in Watford is more important than ever. Removing danger over the use of any electrical equipment has become paramount in the move from paper to virtual documentation. For example, with advances in technology, legal compliance in other sectors means that digital signatures are now the norm where handwritten signatures were acceptable in the past. Handheld and portable electrical devices are themselves often used to make checks on inventory and to inspect equipment. These devices must themselves be checked to ensure that they are safe to use, so PAT Testing in Watford is a legal requirement. Advice from the Institution of Engineering and Technology (the IET) and the Health and Safety Executive (HSE) suggests that in the case of the field of construction, inspection and testing should be carried out at three month intervals for certain types of appliance. Other fields should carry out inspections annually and testing less frequently in some cases. Offices, shops, hotels and schools are all covered in the guidance stipulations. In effect, the intensity and depth of testing and inspection depends on the risk that the appliance will develop faults.

Obviously, the nature of the electrical equipment and its environment will play major factors in the potential development of problems. For example, a dusty environment such as a building site may require more thorough maintenance of equipment than more hygienic environments. However, even a sterile laboratory environment that produces high-value medications may require the maintenance of electrical equipment as a breakdown will be more costly.

Employees should be made aware when not to use portable equipment. For example, if the power cable to a laptop is frayed, or the plug on another piece of equipment is cracked, then that appliance should not be used until the fault is fixed. Users should be made aware how to make their own checks and carry out minor tests on equipment before they use it if necessary. Statistically, the vast majority of problems with electrical equipment are found with a visual inspection. Faults should be reported to supervising staff or management.

PAT Testing in Watford can be carried out by an external company or it can be carried out by those who work within a company who have been provided with the training to do so. Those with official qualifications and employees who have attended health and safety courses offered by electrical health and safety companies can perform inspections and testing. Outsourcing of PAT testing is common, but compliance officers within a company often receive training in the testing of portable equipment.

What Is PAT Testing and Why Is It Used?

PAT testing is an important testing process in the UK, Republic of Ireland, Australia and New Zealand by which portable appliances are required to be checked for safety standards. The Health and Safety at Work Act of 1974 was the first legislation that required companies to have their electrical equipment tested on a regular basis. The Management of Health and Safety at Work Regulations of 1999 established further requirements for PAT testing. Health and safety regulations require that portable electrical appliances in the workplace operate in a safe manner that prevents any potential harm to employees. By law, all electrical systems must be properly inspected and tested for defects and safety.

The law allows companies to gauge their electrical appliances in-house, which allows for more flexibility during the process. However, many companies hire an external company that has employees qualified to perform PAT testing. All testers must have extensive knowledge of electrical systems and they must be officially qualified to perform PAT. Each tester must have a sufficient understanding related to the modes of electrical, thermal and mechanical damage that may result from damaged or poorly designed equipment. There are four different testing situations designated by the IEE Code of Practice:

1) Type testing to an appropriate standard. This type involves testing to determine whether the electrical equipment meets the designated requirements. Type testing is frequently performed by external organizations.

2) Production calibration. Production calibration involves testing the electrical appliance during the production of the appliance and before it is released into service. Production testing is important to prevent unsafe appliances from being utilized by workers.

3) In-service testing. In-service testing involves a preliminary inspection, continuity tests, insulation testing and functional checks. In-service testing is performed to provide certainty that electrical appliances are currently in satisfactory condition. If an electrical appliance fails this test, it must either be repaired or replaced.

4) Testing after repair. If an electrical appliance was in unsatisfactory condition and has been repaired, tests must be performed to ensure that the repairs were sufficient to restore the appliance to satisfactory condition.

The level of testing required for portable electrical appliances is largely dependent on the risk associated with the specific appliance. To ensure that electrical appliances are safe in the home and in the workplace, it is important to perform PAT testing on a regular basis. This can often be done on site by calling out a PAT tester, many can be found online in local areas.

What You Must Know About PAT Testing in London

The Health and Safety Executive in the UK, and enactment, for example, the Electricity at Work Regulations, express that electrical apparatuses ought to be kept up to guarantee that they are sheltered and represent no danger of damage to the people utilizing them. The main genuine approach to conform to the different bits of enactment is known as Pat Testing and in London, it is an imperative part of any wellbeing and security strategy inside the work environment.

With more than a quarter century of reported mischances which include electrical gear finishing in a casualty, measurements demonstrate that in circumstances where PAT testing does not occur in London, electrical hardware has neglected to be accurately kept up. Furthermore, episodes of flame often begin by electrical machines either not being kept in great condition or by gear being utilized for purposes other than proposed or by being put away in unacceptable conditions.

The level to which the hardware must be have PAT Testing performed, relies on upon the sort of apparatus, the nature and area in which it is utilized and the probability of it getting to be flawed. The Health and Safety at Work Act puts a legitimate commitment on businesses and the independently employed in circumstances where electrical apparatuses are utilized by representatives as a part of the working environment. This additionally applies to such places where repairs or administrations of hardware are completed, or by people in general for instance, in shops, lodgings, schools, medicinal focuses, and rental shops with gear for contract.

On the off chance that you fall into any of the aforementioned classes or one comparative, then you have to guarantee your versatile electric machines are tried as needs be.

How would you choose which organization you ought to use to do your PAT Testing?

All things considered, there are a couple of things to discover preceding selecting a temporary worker.

The firm you are thinking about utilizing ought to be licensed by an outer association, for example, NICEIC. This association has strict measures and any licensed organization will have the capacity to supply you with a full strategy explanation and a danger appraisal of any work waiting be done to guarantee the gear is kept up to the required level.

In spite of the fact that the specialists playing out the testing are not lawfully obliged to hold City and Guilds 2377 authentications, capabilities of this kind are prone to energize your trust in the PAT Testing organization.

You can likewise approach the organization to give references to you of individuals who have utilized their administrations as a part of the past. You can then get in touch with them and request their assessment of the demonstrable skill of the organization.

Whilst having your hardware tried, you would prefer not to lessen your business turnover so it is key to have the capacity to keep your business running all through this timeframe. This should be possible by picking a PAT Testing organization who are adaptable and arranged to work to your necessities along these lines bringing on as meager disturbance as could be expected under the circumstances to the working day.